====== PT Config ====== ** **\\ ** **\\ ** **\\ ====== PT Config Head ====== ===== Head Info sekcia =====

**Country** \\ Country= "Slovensko/Cesko/Polsko" Project="Lublin" - default Country= "Slovensko" \\ Country="Polsko" - NFCReader::GetInstance()->SwitchMifareMode(true) - koli emulovanym mifare \\ Country="Slovensko" - nastavenie pismenkoveho adresara ako ma byt na slovensku - pouzivaj slovenske penazenku \\ \\ Country="Cesko" - nastavenie pismenkoveho adresara ako ma byt v cesku - pouzivaj cesku penazenku \\ **Project** attribute Project added in version PT_03_013 \\ Lublin - enables special Lublin behaviour) \\ ** **\\ ** **\\ ====== PT Config Body ====== ===== Nastavenie alternativnej cesty pre eptmeemconvert.xml =====

ak uvedeny nod nie je v PTConfig.xml default cesta je "/opt/emtest/var/spool/incoming/eptmeemconvert.xml" ===== Nastavenie urovne logovania =====


  - vypnute logovanie

**LogType** disable logs - 0 / enable all logs (0xFFFFFFFF) / set log lovel [[howto:logging|--- Read more - emlog --- ]]\\ (examples: enable timers 0x20, enable errors 1 / 0x1 ) default logType = L_DUMP | L_TIMER | L_FUNCTION | L_ERR | L_WARN | L_INFO | L_PID | L_HEAD | L_TIME;\\ **LogCount** pocet log suborov ktore ma udrziavat **LogPath** cesta kde logovat \\ - ak cesta zacina lomitkom alebo je v nej ":" tak sa berie ako absolutna cesta inak sa cesta berie ako relativne vzhladom na umiestnenie spustitelnej binarky aplikacie **LogLimitSize** velkost log suboru v bajtoch pri ktrorom ma vykonat zarotovanie logu (zazipovanie a vytvorenie noveho log suboru) \\ ===== Nastavenia MAD adresara =====

**DontUse** - nepokusat sa autentifikovat MAD - "1" - nepokusat sa autentifikovat MAD / "0" - pokusa sa autentifikovat a citat MAD / defaul je 0 ===== Nastavenia MAD 2 adresara =====

===== Nastavenia Emtest adresara =====

===== Nastavenie DosMesacnikWrite =====

===== Platnost =====

**verify_signature** - nastavenie kontrolovania podpisov pri MF_STANDARD default value verify_signature is 1 ===== Multicard =====

ak nenajde ziadnu aktivovanu virtualnu kartu, tak vrati prvu \\ **** default value is 0 (don't send card change during card processing) \\ **** from version of PT_03_015 -> Ignoring reading of purse on old DES cards, because they were not initialized in Germany \\ **** default value=0, if card is in field, next operation don't read directory again (MAD, faredirectory, applicationList), so value=1 is setted for initializacion cards, when writing MAD directory, it's needed to use new readed data, not cached. \\ **** \\ **** - vypnutie Sw SAMu nutne pre inicializaciu\\ ===== Nastavenie apletov pre HCE a NFC SIM =====

===== Nastavenie apletov pre SAM ===== WROCLAW has to be first, because after fist successful selection MENICA SAM returns success for any valid/invalid applet

** **\\ ****