Table of Contents

PT Config

<?xml version=“1.0”?>
<PTerminal Note=“Platobny terminal”>
<Head>

PT Config Head

Head Info sekcia

<Info Version="8.00" Date="2005.27.12 11.41.00" Country="Polsko" Project="Lublin" ></Info>

Country
Country= “Slovensko/Cesko/Polsko” Project=“Lublin” - default Country= “Slovensko”
Country=“Polsko” - NFCReader::GetInstance()→SwitchMifareMode(true) - koli emulovanym mifare
Country=“Slovensko” - nastavenie pismenkoveho adresara ako ma byt na slovensku - pouzivaj slovenske penazenku

Country=“Cesko” - nastavenie pismenkoveho adresara ako ma byt v cesku - pouzivaj cesku penazenku
Project attribute Project added in version PT_03_013
Lublin - enables special Lublin behaviour)

</Head>
<PTConfig>

PT Config Body

Nastavenie alternativnej cesty pre eptmeemconvert.xml

<eptmeemconvert alternativePath="/opt/emtest/etc/eptmeemconvert.xml" />

ak uvedeny nod nie je v PTConfig.xml default cesta je ”/opt/emtest/var/spool/incoming/eptmeemconvert.xml”

Nastavenie urovne logovania

<Logs LogType ="0"> </Logs> - vypnute logovanie 
<Logs LogType ="0x009d003b" LogPath="../log/servicept.log" LogCount="200" LogLimitSize="10000000" > </Logs>

LogType disable logs - 0 / enable all logs (0xFFFFFFFF) / set log lovel --- Read more - emlog ---
(examples: enable timers 0×20, enable errors 1 / 0×1 ) default logType = L_DUMP | L_TIMER | L_FUNCTION | L_ERR | L_WARN | L_INFO | L_PID | L_HEAD | L_TIME;

LogCount pocet log suborov ktore ma udrziavat

LogPath cesta kde logovat
- ak cesta zacina lomitkom alebo je v nej ”:” tak sa berie ako absolutna cesta inak sa cesta berie ako relativne vzhladom na umiestnenie spustitelnej binarky aplikacie

LogLimitSize velkost log suboru v bajtoch pri ktrorom ma vykonat zarotovanie logu (zazipovanie a vytvorenie noveho log suboru)

Nastavenia MAD adresara

<Mad DontUse="1" />

DontUse - nepokusat sa autentifikovat MAD - “1” - nepokusat sa autentifikovat MAD / “0” - pokusa sa autentifikovat a citat MAD / defaul je 0

Nastavenia MAD 2 adresara

<Mad2 opravovat="0"></Mad2>

Nastavenia Emtest adresara

 <EmtestAdr opravovat="2"></EmtestAdr>

Nastavenie DosMesacnikWrite

  <DosMesacnikWrite disabled="1"></DosMesacnikWrite><!-- Vynimka pre lublin, tam sa musi citat ale nesmie prepisovat -->

Platnost

<Platnost verify_signature="0" testovat="0" />

verify_signature - nastavenie kontrolovania podpisov pri MF_STANDARD default value verify_signature is 1

Multicard

<MultiCard ReadNonAssignedVirtualCard="1"></MultiCard>

ak nenajde ziadnu aktivovanu virtualnu kartu, tak vrati prvu 

<Kluce testovacie="0" typ_preklucovania="0"></Kluce>

<!– typ_preklucovania - 0 → MAD kluce, 1 → Diverzifikovane kluce –>
<SendCardStateChangeDuringCardProcessing value=“1” /> default value is 0 (don't send card change during card processing)
<IgnorePurseOnDesV1 value=“1” /> from version of PT_03_015 → Ignoring reading of purse on old DES cards, because they were not initialized in Germany
<ForceRecheckCard value=“1” /> default value=0, if card is in field, next operation don't read directory again (MAD, faredirectory, applicationList), so value=1 is setted for initializacion cards, when writing MAD directory, it's needed to use new readed data, not cached.
<Personalization flag=“0”/>

<SWESAM disabled=“1” /> - vypnutie Sw SAMu nutne pre inicializaciu

Nastavenie apletov pre HCE a NFC SIM

<ClAppletAids>
	<ClAppletAid aid="454D746573744E4643417070" /> <!-- TD NFC SIM APPLET -->
	<ClAppletAid aid="5472616E7364617461417070" /> <!-- HCE AID -->
</ClAppletAids>

Nastavenie apletov pre SAM

WROCLAW has to be first, because after fist successful selection MENICA SAM returns success for any valid/invalid applet 

<AppletNames>
    <AppletName hex="1" name="0AA00000006203010C0602"/> <!-- WROCLAW --> 
    <AppletName name="EMTESMESVTAPPLET"/>  <!-- Stary emtest SAM (Lublin, IDOL) --> 
    <AppletName hex="1" name="D70300000102000241706c53616d"/> 
    <AppletName name="CrsftControl"/> <!-- MSK --> 
    <AppletName hex="1" name="D2760001354B41534D303100"/> <!-- VDV KA --> 
</AppletNames>

</PTConfig>
</PTerminal>