Table of Contents
Pripajanie sa na mijolu prostrednictvom konzoly
Linux
Pripoji sa konzola ku mijole (ci uz usb → konzola prevodnik, alebo seriak → konzola prevodnik). Na PC sa nainstaluje minicom
sudo apt-get install minicom
spusti sa minicom:
minicom -o
nastavi sa minicom aby bolo nastavene: 38400 8N1, bez HW flow control. Postupnost prikazov pre nastavenie je: Ctrl+A Z, potom O. Tabulka ma vypadat takto v pripade USB prevodnika (podla jeho cisla ziskaneho z prikazu dmesg):
+-----------------------------------------------------------------------+ | A - Serial Device : /dev/ttyUSB0 | | B - Lockfile Location : /var/lock | | C - Callin Program : | | D - Callout Program : | | E - Bps/Par/Bits : 38400 8N1 | | F - Hardware Flow Control : No | | G - Software Flow Control : No | | | | Change which setting? | +-----------------------------------------------------------------------+
a nejako takto v pripade priameho seriaku v pripade prveho portu:
+-----------------------------------------------------------------------+ | A - Serial Device : /dev/ttyS0 | | B - Lockfile Location : /var/lock | | C - Callin Program : | | D - Callout Program : | | E - Bps/Par/Bits : 38400 8N1 | | F - Hardware Flow Control : No | | G - Software Flow Control : No | | | | Change which setting? | +-----------------------------------------------------------------------+
Po ulozeni a pripojeni by sa mala zobrazit poziadavka na prihlasenie podobne ako cez ssh.
Windows
Prosim kto vie nech dopise 
